Minimum Concrete Slab Thickness: 6 Inches Minimum Concrete Edge Distance: 8 Inches (One Installed), 13 Inches (Two or More Installed Within 36 Inch Spacing) Minimum Spacing Between Pick Points: 18 Inches Swivel Hoist Ring is designed to 5:1 on ultimate strength and load tested to 2:1 (Meets ASME B30.26)Ĭoncrete Anchor is designed to ACI 318-14, Minimum 2:1 Safety FactorĬoncrete Anchor Embedment Depth: 4-1/4 Inches Working Load Limit (WLL) = 2,500 lbs in Any Direction (Short Duration Loading), or 1,100 lbs in Any Direction (Sustained Permanent/Seismic Loading), Assy Only, See Warnings Page Rigging Pick Points can be used for concrete lifting, to create concrete anchor points, as attachable lifting lugs or attachable bails, creating a lifting point, or for fall restraint applications. a plate pick point because a single anchor is supporting the load. Note that the anchor embedment is deeper with a single pick point vs. The single rigging pick point for concrete installation uses one epoxy anchor. Unlike the plate rigging pick point, the single rigging pick point can be installed in tight spaces or on narrow beams. This revolutionary anchor design comes as a kit with everything you need to quickly install a Rigging Pick Point. It can quickly be installed on concrete structures, ceilings, walls or floors. The 2,500 lb Single Rigging Pick Point for concrete installation has a working load limit (WLL) of 2,500 lbs in any direction for short duration loading, and 1,100 lbs in any direction for sustained permanent/seismic installations.

Concrete lifting lugs